A Disk-Shaped Magnetoelastic Torque Sensor for Robotic Joints Using Permanent Magnetization
arXiv:2609.33542v2 Announce Type: replace Abstract: Direct torque sensing is a growing need in the robotics community to enable precise control and interactions where torque estimation from motor current is not sufficient. This paper presents a novel disk-shaped magnetoelastic torque sensor with a compact axial envelope of about 1 cm, suitable for integration in robotic joints. A four-magnetometer architecture is used to measure the field modulated by the stress affecting a narrow magnetized re
Overview
arXiv:2609.33542v2 Announce Type: replace Abstract: Direct torque sensing is a growing need in the robotics community to enable precise control and interactions where torque estimation from motor current is not sufficient. This paper presents a novel disk-shaped magnetoelastic torque sensor with a compact axial envelope of about 1 cm, suitable for integration in robotic joints. A four-magnetometer architecture is used to measure the field modulated by the stress affecting a narrow magnetized region while rejecting the effects of parasitic cross forces. A custom-designed magnetic shield enhances the torque sensitivity while reducing the external stray fields by a factor 7x. The device measures the torque with an accuracy of 1.34 %FS relative to the 50 Nm full scale (FS). The paper details the development of the sensor through the mechanical design, the magnetization procedure, and the experimental validation. The results demonstrate the potential of the proposed sensor for robotic applications.
Source
Originally published at arxiv.org.
Related Articles
Source: https://arxiv.org/abs/2609.33542
