A Mixed-Stiffness Anthropomimetic Fingertip Broadens the Operating Range for Coin Grasping
arXiv:2608.07887v1 Announce Type: new Abstract: Robotic grasping of thin, flat objects such as coins on hard surfaces remains challenging because conventional methods require reorienting the object, accessing its underside, or adding a dedicated nail mechanism. We previously showed that a rigid nail arrests soft-pad deformation and thereby forms a geometric constraint that improves precision grasping. Here we asked whether an additional constraint-forming boundary, created within the pad by mat
Overview
arXiv:2608.07887v1 Announce Type: new Abstract: Robotic grasping of thin, flat objects such as coins on hard surfaces remains challenging because conventional methods require reorienting the object, accessing its underside, or adding a dedicated nail mechanism. We previously showed that a rigid nail arrests soft-pad deformation and thereby forms a geometric constraint that improves precision grasping. Here we asked whether an additional constraint-forming boundary, created within the pad by material choice rather than by anatomy, could extend the conditions under which that constraint holds. We fabricated anthropomimetic fingertips with Shore E10 silicone at the center and Shore A60 at the sides, and compared them with uniformly soft E10 fingertips. An automated apparatus performed an oblique rotational tip pinch in which the pad engaged the coin's lateral surface, lifting it from flush contact with no gap beneath it. Over variations in horizontal approach distances, vertical finger displacements, and index-finger rotation, the mixed-stiffness pair maintained high success rates across more tested settings than the uniform pair during both geometric-constraint formation and the transition to a stable grasp. The nail-free pair failed in all 36 conditions of Experiment 1-1. However, the uniform pair performed better when coin position along the finger axis was varied, a condition-dependent trade-off. After tuning for coin size, both fingertip types grasped all six Japanese denominations. These results suggest that the operating range for thin-object grasping depends not only on pad softness but also on where stiffness is placed within a nail-supported pad, making boundary placement a candidate fingertip design variable.
Source
Originally published at arxiv.org.
Related Articles
- PhysX-CoT: Structured Physical Reasoning from a Single Image to Simulation-Ready 3D Assets
- Anchor-Based AI Approach for Pre-Crash Object Detection Utilizing Micro-Doppler Signatures in Automotive Radar
- Removing Infrastructure Barriers in Human-Robot Collaboration Through Wireless Reconfigurable Cells
Source: https://arxiv.org/abs/2608.07887
