A Unified Kinematic Representation Enables Reusable Biological Joint Moment Estimation

Published October 8, 2026 · Category: Robotics

Overview

arXiv:2610.09150v1 Announce Type: new Abstract: Objective: Data-driven models that estimate physiological states, particularly biological joint moments, are widely used in exoskeleton control. However, these estimators are often coupled to device-specific sensor configurations, limiting controller transfer and the use of open-source biomechanics datasets. Methods: We proposed joint kinematics as an intermediate representation that decouples hardware-specific sensing from downstream biological joint moment estimation. A joint-moment estimator using joint angles and angular velocities was trained exclusively on open-source biomechanics data and evaluated using kinematics from a hip exoskeleton, knee exoskeleton, and inertial measurement unit (IMU) sensor suite during level-ground, ramp-ascent, and ramp-descent walking. Results: The estimator achieved an root mean square error (RMSE) of 0.17 Nm/kg and coefficient of determination (R2) of 0.79 using hip exoskeleton kinematics, 0.19 Nm/kg and 0.62 using knee exoskeleton kinematics, and 0.15 Nm/kg and 0.85 using kinematics derived from IMUs across bilateral hip, knee, and ankle joints. Conclusion: Joint kinematics enabled an estimator trained only on open-source data to operate across distinct wearable platforms. Significance: This framework may reduce target-device data collection and support transferable biological joint moment estimation for exoskeleton control and wearable biomechanics.

Source

Originally published at arxiv.org.

Related Articles

• SAFE: Unified Slip and Fracture Detection with Low-Cost Acoustic Sensing in Robotic Grasping
• From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations
• HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids