Industry Monitor Humanoid Industrial & Cobot AGV / AMR Quadruped Reducers · Servos · Sensors Drones & Autonomy Embodied AI
Robos News
Robotics

Coupled State-Space Modelling, Control, and Policy Distillation for Hybrid Rigid-Pneumatic Manipulators

arXiv:2609.29424v1 Announce Type: new Abstract: Hybrid manipulators combine motorized rigid joints with pressure-actuated origami segments. Published arms of this kind are controlled with decoupled per-DOF loops, and the cost of this approximation has not been quantified, because the coupled model needed to measure it has not been built. This paper derives such a model for a chain of $N$ alternating revolute joints and Kresling origami segments, including pneumatic chamber dynamics and crease h

Published September 25, 2026 · Category: Robotics

Overview

arXiv:2609.29424v1 Announce Type: new Abstract: Hybrid manipulators combine motorized rigid joints with pressure-actuated origami segments. Published arms of this kind are controlled with decoupled per-DOF loops, and the cost of this approximation has not been quantified, because the coupled model needed to measure it has not been built. This paper derives such a model for a chain of $N$ alternating revolute joints and Kresling origami segments, including pneumatic chamber dynamics and crease hysteresis. Using the model, we measure the coupling directly and show that its strength varies joint by joint, and that decoupled control loses precisely on the strongly coupled joints while remaining competitive on the one nearly decoupled joint. Coupled model-based controllers track $2.5\times$ tighter than a decoupled PID baseline at lower torque. However, the model predictive controller (MPC) is too slow for real time, and model-free reinforcement learning stalls far below acceptable success rates on a strict settling metric. We therefore distill the MPC into a small neural policy with behavior cloning and DAgger. The distilled policy settles 93-94$\%$ of goals with zero collisions, within a few points of its teacher, and runs inside the 5 ms control step where the MPC does not. Where the teacher itself fails, we trace the failure to a limit cycle with the bellows' lightly damped mode, and we remove it by selecting goal postures holdable at low pressure.

Source

Originally published at arxiv.org.

Related Articles

Robos News Newsroom

Robos News reports on robotics research, components, manufacturers, field deployments, and industrial automation worldwide. Tip our newsroom: [email protected]

Email the newsroom →
Reporting standard: Product specifications, deployment counts, and performance claims are attributed to their source. Safety-critical decisions should be based on the applicable technical documentation and validation for the operating environment.
More from News →