Energy-Aware Performance Evaluation of Nonlinear Mechatronic Systems Under Matched-Tracking Conditions

Published August 26, 2026 · Category: Robotics

Overview

arXiv:2608.23578v1 Announce Type: cross Abstract: Trajectory-tracking metrics such as root-mean-square error (RMSE), overshoot, and settling time are widely used to evaluate control performance in mechatronic systems. However, these measures describe output tracking alone and do not account for the actuator effort required to produce the observed motion. This limitation becomes more pronounced in nonlinear systems, where stiffness and dissipation depend on the system state. This paper examines how these effects influence actuator energy under similar tracking conditions. An energy-aware evaluation framework is introduced that combines tracking error with cumulative actuator energy and enables comparison between systems with approximately matched performance. A simple index (EAPI) is used to capture both aspects in a single measure. Simulation results for linear and nonlinear systems under proportional-derivative control show that comparable tracking accuracy can correspond to significantly different actuator energy. The nonlinear system consistently requires more energy across matched operating points, reflecting the influence of nonlinear stiffness and friction. These results suggest that trajectory-based metrics alone may not fully capture differences in system effort, and that including energy provides a more informative basis for performance evaluation.

Source

Originally published at arxiv.org.

Related Articles

• Vision-Language-Action Safety: Threats, Challenges, Evaluations, and Mechanisms
• A Durable Vision-Based Tactile Fingertip for Robotic Manipulation
• CARO: Contact-Agnostic Residual Observation for Zero-Shot Robust Quadruped Locomotion