Industry Monitor Humanoid Industrial & Cobot AGV / AMR Quadruped Reducers · Servos · Sensors Drones & Autonomy Embodied AI
Robos News
Robotics

Integrated Guidance and Control of a Mother-Child UAV-UGV System for Cooperative Missions

arXiv:2609.20540v1 Announce Type: new Abstract: Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, an

Published September 18, 2026 · Category: Robotics

Overview

arXiv:2609.20540v1 Announce Type: new Abstract: Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, and synchronized descent. The recovery stack combines jerk-bounded reference generation, disturbance-observer-augmented planar tracking, feasibility-aware vertical control, a discrete-time barrier-based safety filter for relative vertical geometry, and communication-aware carrier-state prediction. The contribution is the coordinated system-level integration of these methods for recovery onto a hovering multirotor and its full-scale outdoor validation. The framework is implemented on a PX4-ROS 2 architecture using RTK-enabled GNSS, IMU, and barometric fusion, with mothership-side 1D lidar used only as an auxiliary near-contact cue. RTK-fixed positioning was maintained throughout testing. Across 20 outdoor cooperative missions, 17 successfully completed deployment, sortie, and recovery, giving an observed mission success rate of 85%. For successful recoveries, mean terminal-alignment time was 6.3 s, mean planar alignment error at acceptance was 0.18 m, maximum terminal planar deviation was 0.32 m within a 0.40 m capture radius, and minimum logged relative vertical separation during coupled descent was 0.41 m. Mothership planar station-keeping RMS error was 0.25 m. The three unsuccessful trials occurred at different mission stages and are analyzed separately. Results demonstrate practical autonomous aerial recovery within the tested outdoor operating envelope.

Source

Originally published at arxiv.org.

Related Articles

Robos News Newsroom

Robos News reports on robotics research, components, manufacturers, field deployments, and industrial automation worldwide. Tip our newsroom: [email protected]

Email the newsroom →
Reporting standard: Product specifications, deployment counts, and performance claims are attributed to their source. Safety-critical decisions should be based on the applicable technical documentation and validation for the operating environment.
More from News →