Industry Monitor Humanoid Industrial & Cobot AGV / AMR Quadruped Reducers · Servos · Sensors Drones & Autonomy Embodied AI
Robos News
Robotics

Morphology and actuation as inductive biases in robotic hand manipulation

arXiv:2609.05206v1 Announce Type: new Abstract: Robotic hands vary widely in anatomical fidelity and mechanical complexity, and these structural choices influence the coordination of joint motions and the difficulty of controlling the system. A unified framework is presented in which the kinematic and actuation stages are analysed separately and in composition, through the conditioning of the task Jacobian, the actuation matrix, and their product. It is applied to two hands representing opposin

Published September 7, 2026 · Category: Robotics

Overview

arXiv:2609.05206v1 Announce Type: new Abstract: Robotic hands vary widely in anatomical fidelity and mechanical complexity, and these structural choices influence the coordination of joint motions and the difficulty of controlling the system. A unified framework is presented in which the kinematic and actuation stages are analysed separately and in composition, through the conditioning of the task Jacobian, the actuation matrix, and their product. It is applied to two hands representing opposing design philosophies, the Shadow Dexterous Hand and the Anatomically Correct, Biomechatronic Hand, along four morphological aspects: joint axis geometry, actuator-to-DOF ratio, coupling architecture, and authority distribution. All parameters are derived from the hands' canonical digital representations. Anatomical fidelity carries no uniform advantage: oblique axes improve thumb conditioning but leave the long fingers worse conditioned than the orthogonal-axis design, while the branching tendon network improves the effective control mapping at every long finger and worsens it significantly at the thumb, where actuator authority is concentrated on thumb opposition. Predictions derived from these metrics are evaluated against reinforcement learning experiments using PPO, DDPG+HER, and TQC+HER, across three different tasks.

Source

Originally published at arxiv.org.

Related Articles

Robos News Newsroom

Robos News reports on robotics research, components, manufacturers, field deployments, and industrial automation worldwide. Tip our newsroom: [email protected]

Email the newsroom →
Reporting standard: Product specifications, deployment counts, and performance claims are attributed to their source. Safety-critical decisions should be based on the applicable technical documentation and validation for the operating environment.
More from News →