Industry Monitor Humanoid Industrial & Cobot AGV / AMR Quadruped Reducers · Servos · Sensors Drones & Autonomy Embodied AI
Robos News
Robotics

On the Optimized Use of Non-Orthonormality Constraints for the Quasi-Static INS Alignment of Autonomous Underwater and Surface Vehicles

arXiv:2608.21390v1 Announce Type: new Abstract: Inertial navigation systems are specialized navigation apparatuses that equip almost all autonomous underwater and surface vehicles. They require precise initial alignment, i.e., determination of their initial attitude, which is typically achieved: (a) in quasi-static conditions (whenever possible); and (b) in two stages: Coarse Alignment (CA), using methods like TRI-axis Attitude Determination (TRIAD), and Fine Alignment (FA), via Zero Velocity U

Published August 25, 2026 · Category: Robotics

Overview

arXiv:2608.21390v1 Announce Type: new Abstract: Inertial navigation systems are specialized navigation apparatuses that equip almost all autonomous underwater and surface vehicles. They require precise initial alignment, i.e., determination of their initial attitude, which is typically achieved: (a) in quasi-static conditions (whenever possible); and (b) in two stages: Coarse Alignment (CA), using methods like TRI-axis Attitude Determination (TRIAD), and Fine Alignment (FA), via Zero Velocity Update (ZVU)-based Extended Kalman Filtering (EKF). However, conventional methods suffer from slow convergence and limited bias estimability. In response, this paper introduces: (a) an optimized version of a recently proposed CA method, namely, TRIAD with Coarse Bias Estimation (TRIAD-CBE); and (b) a novel FA EKF observation model that incorporates Non-Orthonormality (NON) error constraints derived from TRIAD, directly linking these errors to the inertial sensor biases. As validated through extensive Monte Carlo (MC) simulations, as well as real-world experiments using two Inertial Measurement Units (IMUs) of different grades, our approaches substantially accelerate the convergence of misalignment and bias estimates (from minutes to seconds), while maintaining accuracy/precision comparable to traditional techniques.

Source

Originally published at arxiv.org.

Related Articles

Robos News Newsroom

Robos News reports on robotics research, components, manufacturers, field deployments, and industrial automation worldwide. Tip our newsroom: [email protected]

Email the newsroom →
Reporting standard: Product specifications, deployment counts, and performance claims are attributed to their source. Safety-critical decisions should be based on the applicable technical documentation and validation for the operating environment.
More from News →