Underwater Navigation in Unsteady Flows Using Measurement Histories from a Single Sensing Unit
arXiv:2609.26753v1 Announce Type: new Abstract: Spatial flow measurements support underwater navigation, but distributed sensing is constrained by robot size and sensor layout. We use a causal observer to estimate current lateral velocities from a finite history of measurements collected by a single sensing unit, supplying the inputs of a fixed navigation controller. In two-dimensional wake simulations with access to body-frame ambient velocity, this virtual sensing interface reduces simultaneo
Overview
arXiv:2609.26753v1 Announce Type: new Abstract: Spatial flow measurements support underwater navigation, but distributed sensing is constrained by robot size and sensor layout. We use a causal observer to estimate current lateral velocities from a finite history of measurements collected by a single sensing unit, supplying the inputs of a fixed navigation controller. In two-dimensional wake simulations with access to body-frame ambient velocity, this virtual sensing interface reduces simultaneous flow sampling from three points to the robot center. Trained only in a circular-cylinder wake at Re = 100, the flow-history observer achieves 84.4% and 80.6% success at held-out Re = 205 and 240 without retraining. These rates are 7.4 and 4.6 percentage points below direct spatial sensing and more than 30 points above a matched current-only observer. Past flow remains beneficial when past goal and yaw information is available. Across obstacle geometries, performance remains close to direct sensing in square-prism wakes but declines in triangular-prism wakes. Component replacement identifies the lateral velocity difference as control-relevant, while controlled perturbations reveal sensitivity to error persistence. The results demonstrate the closed-loop utility of single-point flow histories under the assumed observation model.
Source
Originally published at arxiv.org.
Related Articles
Source: https://arxiv.org/abs/2609.26753
