Vision-Aided Relative State Estimation for Approach and Landing on a Moving Platform with Inertial Measurements

Published June 11, 2026 · Category: Robotics

Overview

arXiv:2512.19245v2 Announce Type: replace-cross Abstract: This paper tackles the problem of estimating the relative position, orientation, and velocity between a UAV and a planar platform undergoing arbitrary 3D motion during approach and landing. The estimation relies on measurements from Inertial Measurement Units (IMUs) mounted on both systems, assuming there is a suitable communication channel to exchange data, together with visual information provided by an onboard monocular camera, from which the bearing (line-of-sight direction) to the platform's center and the normal vector of its planar surface are extracted. We propose a cascade observer with a complementary filter on $\mathbf{SO}(3)$ to reconstruct the relative attitude, followed by a linear Riccati observer for relative position and velocity estimation. Convergence of both observers is established under persistently exciting conditions, and the cascade is shown to be almost globally asymptotically and locally exponentially stable. We further extend the design to the case where the platform's rotation is restricted to its normal axis and show that its measured linear acceleration can be exploited to recover the remaining unobservable rotation angle. A sufficient condition for local exponential convergence in this setting is provided. The proposed observers are validated through extensive simulations.

Source

Originally published at arxiv.org.

Related Articles

• UGV-Conditioned Multi-UAV Informative Planning on a Shared Exposure Belief
• SAFER-Nav: Enhancing Safety for Visual Robot Navigation via Segmentation-Aware Fine-Tuning
• Explore From Sketch: Accelerating UAV Exploration in Large-scale Environments with Prior Maps