Vision-based Goal-Reaching Control for Mobile Robots Using a Hierarchical Learning Framework
arXiv:2601.00610v2 Announce Type: replace Abstract: Reinforcement learning (RL) has strong potential in robotics, but exploration-based training complicates safe deployment on large-scale robots. For such applications, this paper proposes a novel hierarchical goal-reaching framework that integrates stereo visual pose estimation, constrained RL-based motion planning, actuator-level robust adaptive control (RAC), and supervisory safe-return logic. Stereo visual localization is used as the real-ti
Overview
arXiv:2601.00610v2 Announce Type: replace Abstract: Reinforcement learning (RL) has strong potential in robotics, but exploration-based training complicates safe deployment on large-scale robots. For such applications, this paper proposes a novel hierarchical goal-reaching framework that integrates stereo visual pose estimation, constrained RL-based motion planning, actuator-level robust adaptive control (RAC), and supervisory safe-return logic. Stereo visual localization is used as the real-time pose-estimation interface with loop closing, map fusion, and relocalization. The RL planner generates smooth, feasible goal-reaching references using a problem-specific reward structure and motion constraints that promote goal progress, reduce oscillations, preserve vision-consistent smoothness, and respect the mechanical limits of a heavy skid-steered robot. At the actuation layer, a scaled conjugate-gradient (SCG)-trained deep neural network (DNN) approximates a quasi-static actuator feedforward map from wheel-speed data to nominal control input. This feedforward map is combined with a logarithmic-barrier-based RAC to compensate for residual modeling errors, slip-induced disturbances, and bounded mismatch between the nominal map and real actuator response. For the actuator-level wheel-tracking subsystem, uniformly ultimately bounded tracking with exponential convergence to a disturbance-dependent residual set is established under bounded uncertainty. A logarithmic safety supervisor monitors execution, detects unsafe operating conditions, including faults and localization inconsistencies, and switches the robot to safe-return mode. Experiments on a 6000 kg robot over asphalt and loose-soil terrain demonstrate approximately 3--4 cm final-position root mean square error (RMSE), accurate tracking of RL-generated commands, improved actuator-level performance over two RAC baselines, and successful autonomous recovery after fault injection.
Source
Originally published at arxiv.org.
Related Articles
Source: https://arxiv.org/abs/2601.00610